[1]史交齐,赵克枫,韩勇,等.论油、套管螺纹泄漏抗力的确定和螺纹形式的选择[J].石油钻采工艺,1997,19(6):024-31,41.[doi:10.3969/j.issn.1000-7393.1997.06.005]
 Shi Jiaoqi,Zhao Kefeng,Han Yong,et al.DETERMINATION OF RESISTANCE TO LEAK OFF OF TUBING AND CASING THREADS AND SELECTION OF THREAD TYPE[J].Oil Drilling & Production Technology,1997,19(6):024-31,41.[doi:10.3969/j.issn.1000-7393.1997.06.005]
点击复制

论油、套管螺纹泄漏抗力的确定和螺纹形式的选择
分享到:

《石油钻采工艺》[ISSN:1000-7393/CN:13-1072/TE]

卷:
19卷
期数:
1997年6期
页码:
024-31,41
栏目:
论文
出版日期:
1997-12-20

文章信息/Info

Title:
DETERMINATION OF RESISTANCE TO LEAK OFF OF TUBING AND CASING THREADS AND SELECTION OF THREAD TYPE
作者:
史交齐 赵克枫 韩勇 宋治
总公司西安石油管材研究所
Author(s):
Shi Jiaoqi Zhao Kefeng Han Yong Song Zhi
关键词:
油管套管泄漏压力螺纹密封胶结物确定
Keywords:
tubing casingleakagepressurethreadsealingcementing materialselection
DOI:
10.3969/j.issn.1000-7393.1997.06.005
摘要:
传统管柱设计中,只校核油、套管螺纹的连接强度,而忽视螺纹泄漏抗力的校核,使一些油、气井因泄漏而导致失效。文中结合API螺纹密封的特点和影响因素,论述了油、套管螺纹泄漏抗力的确定方法及螺纹形式的选择,以供管柱设计时参考。
Abstract:
In traditional design of string pipe, the examination is conducted only upon the connection strength of threeds of tubing and casing and the check on leakage resistance of threads is neglected that may lead to the failure of some oil and gas productive wells by the reason of thread leak off. In reference of the characteristics and influencing factors of the thread seal, this paper studied the determination method of leak off resistance of tubing and casing threads and the selection of thread type for design job of string pipe.

相似文献/References:

[1]李国庆夏柏如 姜文勇 李子丰.套管柱拉力—扭矩模型及在定向井中的应用[J].石油钻采工艺,2008,30(2):032.
 LI Guoqing,XIA Bairu,et al.Tension-torque model for casing strings and its application to directional wells cementing[J].Oil Drilling & Production Technology,2008,30(6):032.
[2]陈振江 尹瑞新 郭海勇 郝立新 朱国亮.大港南部油田有杆泵井偏磨机理探讨及综合防治[J].石油钻采工艺,2008,30(4):121.
 CHEN Zhenjiang,YIN Ruixin,GUO Haiyong,et al.Mechanism and prevention of uneven abrasion in rod pump wells in southern Dagang Oilfield[J].Oil Drilling & Production Technology,2008,30(6):121.
[3]李敬元 李子丰 李天降 王长进 李桂芳 朱红莉.井下作业管柱力学分析软件及应用[J].石油钻采工艺,2008,30(5):118.
 LI Jingyuan,LI Zifeng,LI Tianjiang,et al.Mechanical analysis software of downhole operation pipe strings and its application[J].Oil Drilling & Production Technology,2008,30(6):118.
[4]张建兵   吕祥鸿  杨  勇  刘 歆.油井管强度计算方法新ISO标准讨论[J].石油钻采工艺,2009,31(2):068.
 ZHANG Jianbing,LV Xianghong,YANG Yong,et al.A Discussion on new ISO criteria for oil well casing strength calculation [J].Oil Drilling & Production Technology,2009,31(6):068.
[5]李子丰 张 欣 王 鹏 李润启.套管开窗侧钻中钻头弯矩分析[J].石油钻采工艺,2010,32(5):013.
 LI Zifeng,ZHANG Xin,WANG Peng,et al.Analysis of bending moment on the bit in sidetrack drilling[J].Oil Drilling & Production Technology,2010,32(6):013.
[6]李子丰 孟宪鹏 梁尔国 王忠福 李天群.水泥浆胶凝失重与套管轴向拉力关系实验研究[J].石油钻采工艺,2010,32(6):023.
 LI Zifeng,MENG Xianpeng,LIANG Erguo,et al.Experimental study on relationship between weight losing of slurry by curing and casing axial tension[J].Oil Drilling & Production Technology,2010,32(6):023.
[7]许 峰 吕拴录 康延军 杨成新 李怀中 秦宏德.井口套管磨损失效原因分析及预防措施[J].石油钻采工艺,2011,33(2):140.
 XU Feng,LV Shuanlu,et al.Failure analysis and preventing measures for casing worn out at well head[J].Oil Drilling & Production Technology,2011,33(6):140.
[8]孙永兴 易炳刚 林元华 韩烈祥 施太和.考虑制造缺陷的套管抗挤强度计算新模型[J].石油钻采工艺,2012,34(1):036.
 SUN Yongxing,Yi Binggang,LIN Yuanhua,et al.A new calculation model for casing collapse resistance strength considering manufacturing imperfections[J].Oil Drilling & Production Technology,2012,34(6):036.
[9]吴 瑶 毛剑琳 李峰飞 党瑞荣.深水油气勘探救援井精确探测技术研究[J].石油钻采工艺,2014,36(4):026.[doi:10.13639/j.odpt.2014.04.007]
 WU Yao,MAO Jianlin,LI Fengfei,et al.Research on precise detection technology of relief wells for deepwater petroleum exploration[J].Oil Drilling & Production Technology,2014,36(6):026.[doi:10.13639/j.odpt.2014.04.007]
[10]陈江华  吴惠梅  李忠慧  刘 斌.超深定向井钻井中钻井参数对套管磨损量的影响[J].石油钻采工艺,2014,36(5):010.[doi:10.13639/j.odpt.2014.05.003]
 CHEN Jianghua,WU Huimei,LI Zhonghui,et al.Effect of drilling parameters on casing wear rate in ultra-deep directional well drilling[J].Oil Drilling & Production Technology,2014,36(6):010.[doi:10.13639/j.odpt.2014.05.003]
[11]张定理.油(水)井套管损坏的内衬修复技术[J].石油钻采工艺,1989,11(4):073.[doi:10.3969/j.issn.1000-7393.1989.04.012]
[12]李子丰,吴德华,黄跃芳,等.套管柱和注汽管柱热弹性力学分析[J].石油钻采工艺,1995,17(6):062.[doi:10.3969/j.issn.1000-7393.1995.06.014]
 Li Zifeng,Wu Dehua,Huang Yaofang,et al.THERMOPLASTIC MECHANICS ANALYSIS OF CASING STRING AND TUBING STRING DURING INJECTING STEAM[J].Oil Drilling & Production Technology,1995,17(6):062.[doi:10.3969/j.issn.1000-7393.1995.06.014]
[13]李宝进,宋治,杜迅风,等.特殊螺纹密封脂的研究及其在石油专用管中的应用[J].石油钻采工艺,1996,18(5):013.[doi:10.3969/j.issn.1000-7393.1996.05.003]
 Li Baojin,Song Zhi,Du Xunfeng,et al.STUDY OF SPECIAL THREAD COMPOUND AND IT’S APPLICATION IN SPECIAL PIPE FOR PETROLEUM[J].Oil Drilling & Production Technology,1996,18(6):013.[doi:10.3969/j.issn.1000-7393.1996.05.003]
[14]史交齐,宋治,张毅.改进上扣控制方法提高油套管螺纹连接质量[J].石油钻采工艺,1997,19(1):023.[doi:10.3969/j.issn.1000-7393.1997.01.006]
 Shi Jiaoqi,Song Zhi,Zhang Yi.IMPROVING MAKING UP CONTROL OF TUBING TO ENHANCE THEIR THREAD CONNECTION QUALITY[J].Oil Drilling & Production Technology,1997,19(6):023.[doi:10.3969/j.issn.1000-7393.1997.01.006]
[15]张朝相,黄开林,王仪.油套混压工艺技术的改进[J].石油钻采工艺,1999,21(1):053.[doi:10.3969/j.issn.1000-7393.1999.01.013]
 Zhang Zhao-xiang,Huang Kailin,Wang Yi.IMPROVEMENT OF MIXED TUBING-CASING FRACTURING TECHNOLOGY[J].Oil Drilling & Production Technology,1999,21(6):053.[doi:10.3969/j.issn.1000-7393.1999.01.013]

备注/Memo

备注/Memo:
收稿日期:1997-04-08;改回日期:。
作者简介:史交齐,1965年生。1988年毕业于北京师范大学数学专业,1993年开始从事管柱与管线力学研究,工程师。
更新日期/Last Update: 1900-01-01