[1]曾德智,林元华,李留伟,等.深井岩盐层套管外载的三维有限元分析[J].石油钻采工艺,2007,29(2):021-23.[doi:10.3969/j.issn.1000-7393.2007.02.006]
 ZENG De-zhi,LIN Yuan-hua,LI Liu-wei,et al.3-D finite element analysis of casing loads in salt rocks of deep wells[J].Oil Drilling & Production Technology,2007,29(2):021-23.[doi:10.3969/j.issn.1000-7393.2007.02.006]
点击复制

深井岩盐层套管外载的三维有限元分析
分享到:

《石油钻采工艺》[ISSN:1000-7393/CN:13-1072/TE]

卷:
29卷
期数:
2007年2期
页码:
021-23
栏目:
钻井与完井工程
出版日期:
2007-04-20

文章信息/Info

Title:
3-D finite element analysis of casing loads in salt rocks of deep wells
作者:
曾德智1 林元华1 李留伟1 施太和1 李再军2 朱达江3
1. 西南石油大学石油管力学和环境行为重点实验室, 四川成都 610500;
2. 塔里木油田公司, 新疆库尔勒 201900;
3. 西南石油大学石油工程2003级, 四川成都 610500
Author(s):
ZENG De-zhi1 LIN Yuan-hua1 LI Liu-wei1 SHI Tai-he1 LI Zai-jun2 ZHU Da-jiang3
Key Laboratory of Petroleum Pipe Mechanics and Environmental Behaviors, Southwest Petroleum University, Chengdu 610500, Sichuan, China
关键词:
深井岩盐层套管外载三维有限元
Keywords:
deep wellsalt rockcasingload3-D finite element analysis
分类号:
TE21
DOI:
10.3969/j.issn.1000-7393.2007.02.006
摘要:
深埋于地下的岩盐在一定地应力和温度作用下发生蠕变,对井中的套管产生随时间而变化的外载,致使套管变形甚至挤毁,为此,针对塔里木油田羊塔地区岩盐层的温度、应力状态及其蠕变特性,建立了岩盐层、水泥环和套管耦合的三维有限元力学模型,研究了地应力状态及其大小、井内液体支撑压力对岩盐层套管受力的影响规律。研究表明,非均匀地应力作用下,盐岩蠕变产生的套管外载是非均匀的,在最小地应力方向的套管外载最大,此时若按上覆地层压力计算套管外挤载荷局限性较大。应用新模型对深井、超深井封固岩盐层的?250.83 mm套管、?177.8 mm套管和?206.38 mm 3种技术套管的强度进行了分析,计算结果与该油田技术套管挤毁的情况吻合,可见新建模型是合理的,可为深井岩盐层套管强度设计提供理论依据。
Abstract:
The oilfield has suffered huge economic losses due to the creep of the salt rock deeply buried underground under the effect of certain earth stress and temperature,which causes the casing load to change with time and results in the casing deformation and shear.So a 3-D finite element analysis(FEA) mechanical model concerning salt rocks and cement mantles as well as casing couples is established in this paper to research the conditions and dimension of the earth stress and the effect of the abutment pressure of fluid in a borehole on the forces exerting on casing in salt rocks.The research shows that the casing load caused by the creep the salt rocks are inhomogeneous,which is the highest in the direction of the minimum earth stress.Therefore,it is greatly limited to calculate the casing external collapse load based on using overlying formation pressure.So in this paper,the new 3-D FEA model is applied to calculate the strength of the three kinds of intermediate casing in deep wells,ultra deep cementing wells and salt rocks.The calculating result is in agreement with the intermediate casing collapse of the oilfield,which proves that the newly established model is reasonable and will lay a solid theoretical basis for the strength design of casing in salt rocks of deep wells.

相似文献/References:

[1]马 开 华.关于国内尾管悬挂器技术发展问题的思考[J].石油钻采工艺,2008,30(6):108.
 MA Kaihua.A consideration on the development of liner hanger technologies in China[J].Oil Drilling & Production Technology,2008,30(2):108.
[2]李永平 程兴生 张福祥 王永辉 车明光 彭建新.异常高压深井裂缝性厚层砂岩储层“酸化+酸压”技术[J].石油钻采工艺,2010,32(3):076.
 LI Yongping,CHENG Xingsheng,et al.Acid fracturing technology for thick fractured sandstone reservoir of deep wells with abnormal high pressure[J].Oil Drilling & Production Technology,2010,32(2):076.
[3]陈振刚.兴古7-H208保留深层水平井导眼技术[J].石油钻采工艺,2010,32(6):112.
 CHEN Zhengang.Using multilateral technique to retain deep horizontal pilot wellbore in Xinggu7-H208[J].Oil Drilling & Production Technology,2010,32(2):112.
[4]张 聪 张景富 乔宏宇 彭邦洲.深井高温抗二氧化碳腐蚀水泥浆体系设计与优选[J].石油钻采工艺,2010,32(5):039.
 ZHANG Cong,ZHANG Jingfu,QIAO Hongyu,et al.Design and select of resisting corrosion cement slurries by carbon dioxide for high temperature deep well[J].Oil Drilling & Production Technology,2010,32(2):039.
[5]王兴武 赵国顺 孙 雪 马文英 陈迎伟 宁长征.巴楚探区深井钻井难点分析与技术对策[J].石油钻采工艺,2011,33(3):001.
 WANG Xingwu,ZHAO Guoshun,SUN Xue,et al.Technical countermeasures and analysis on deep well drilling difficulties in Bachu exploration block[J].Oil Drilling & Production Technology,2011,33(2):001.
[6]丁亮亮 练章华 陈世春 杨帮贵 魏臣兴.高压深井压井过程中井筒温度数值模拟[J].石油钻采工艺,2011,33(4):015.
 DING Liangliang,LIAN Zhanghua,et al.Numerical simulation of wellbore temperature during high-pressure deep well kills[J].Oil Drilling & Production Technology,2011,33(2):015.
[7]和建勇 党冬红 刘艳军 陈 光 张玉平 朱泽鑫.南堡36-P3001井高温小间隙尾管固井技术[J].石油钻采工艺,2014,36(1):048.
 HE Jianyong,DANG Donghong,LIU Yanjun,et al.High temperature small annular space liner cementing techniques of Nanpu 36-P3001 well[J].Oil Drilling & Production Technology,2014,36(2):048.
[8]刘乃震 高远文 王廷瑞 毕玉荣.哥伦比亚G 区复杂深井优快钻井技术[J].石油钻采工艺,2014,36(2):033.[doi:10.13639/j.odpt.2014.02.008]
 LIU Naizhen,GAO Yuanwen,WANG Tingrui,et al.Fast drilling technologies for deep wells in Oil Province G of Colombia[J].Oil Drilling & Production Technology,2014,36(2):033.[doi:10.13639/j.odpt.2014.02.008]
[9]钟福海钟德华.苏桥深潜山储气库固井难点及对策[J].石油钻采工艺,2012,34(5):118.
 ZHONG Fuhai,ZHONG Dehua.Cementing difficulties and countermeasures of deep buried gas storage in Suqiao area[J].Oil Drilling & Production Technology,2012,34(2):118.
[10]许京国 郑淑杰 陶瑞东 刘立超 张志湖 王狮军.高陡构造克深206井钻井提速配套技术 [J].石油钻采工艺,2013,35(5):029.
 XU Jingguo,ZHENG Shujie,TAO Ruidong,et al.Auxiliary technology of drilling speed improving for Well Keshen-206 with high and steep structures [J].Oil Drilling & Production Technology,2013,35(2):029.

备注/Memo

备注/Memo:
收稿日期:2006-06-07。
基金项目:四川省杰出青年学科带头人培养基金(06ZQ026-028);石油科技中青年创新基金(05E7044)资助。
作者简介:曾德智,1980生。西南石油大学油气井工程在读博士研究生。电话:028-83034286,E-mail:zengdezhi@tom.com。
更新日期/Last Update: 1900-01-01