[1]李子丰　张　欣　王　鹏　李润启.套管开窗侧钻中钻头弯矩分析[J].石油钻采工艺,2010,32(5):013-16.
　LI Zifeng,ZHANG Xin,WANG Peng,et al.Analysis of bending moment on the bit in sidetrack drilling[J].Oil Drilling & Production Technology,2010,32(5):013-16.
点击复制

套管开窗侧钻中钻头弯矩分析
分享到：

《石油钻采工艺》[ISSN:1000-7393/CN:13-1072/TE]

卷:
32卷
期数:
2010年5期
页码:
013-16
栏目:
钻井完井
出版日期:
2010-10-20

文章信息/Info

Title:
Analysis of bending moment on the bit in sidetrack drilling
文章编号:
1000 – 7393（ 2010 ） 05 – 0013 – 04
作者:
李子丰　张　欣　王　鹏　李润启
（燕山大学石油工程研究所，河北秦皇岛　066004）
Author(s):
LI Zifeng;  ZHANG Xin;  WANG Peng;  LI Runqi
（Petroleum Engineering Institute, Yanshan University, Qinhuangdao 066004, China）
关键词:
开窗侧钻; 套管; 钻头; 弯矩; 数学模型
Keywords:
sidetrack;  casing;  drill bit;  moment;  mathematical model
分类号:
TE242；TE21
文献标志码:
A
摘要:
在油田开采的过程中，为了达到提高采收率等目的，很多油田都在现场应用了开窗侧钻技术，并且取得了显著的经济效益。在以往的对下部钻具组合受力的分析中，一般默认钻头为铰支，与地层间无弯矩。然而，在实际的开窗侧钻过程中，钻头与地层和套管不均匀偏心接触，必然存在钻头弯矩。因此，在合理假设的基础上，通过数值积分的方法，建立了求解钻头弯矩的数学模型，并且应用Visual Basic2008语言编写求解、分析软件，最后给出了一个计算实例。结果分析表明：钻头弯矩是一个随着钻头的钻进逐渐变化的过程。钻头刚接触套管壁的时候弯矩比较大，随着和地层接触面积增大，弯矩逐渐变小，当钻头全部处在地层中，钻头的弯矩为零。
Abstract:
In the process of reservoir development, so as to achieve the purpose of enhanced oil recovery, many reservoirs applied sidetrack techniques and had achieved remarkable economic benefit. In the past, the stress analysis of the bottom hole assembly is indicated that the drill bit is hinged and no moment with formation. However, in the actual operating environment of drilling, the drill bit keeps touch eccentric with casing and formation, there must be moment on the drill bit. Therefore, given some of reasonable assumptions, the mathematical model is established through the method of numerical integration. The software of mechanical analysis is developed with Visual Basic 2008. At last, an application to field is provided. The results show: bending moment on the bit is gradually changing process with the drilling progress, the value of the moment is relatively large when the bit beginning to touch with the casing, with the contact area increasing, which will be reducing gradually. It is easy to know that bending moment on the bit is zero when the bit is completely in the formation.

参考文献/References:

［1］　
贺亚兵，曾昊，董连刚.套管开窗窗口形状探讨［J］. 石油钻探技术，2001，29（3）：23-25.
HE Yabing, ZENG Hao, DONG Liangang. Discussion of the casing window in sidetracking［J］. Petroleum Drilling Techniques, 2001, 29（3）: 23-25.
［2］　
唐志军.开窗侧钻工艺技术［J］.西部矿探工程，1999，11（5）：39-41.
TANG Zhijun. The technology of sidetrack drilling［J］. West-China Exploration Engineering, 1999, 11（5）: 39-41.
［3］　
肖志，赵力国，彭春风.窗口尺寸可变的侧钻开窗工具［J］.石油钻探技术，2002，30（2）：61-62.
XIAO Zhi, ZHAO Liguo, PENG Chunfeng. Sidetracking tool vary with the size of casing window［J］. Petroleum Drilling Techniques, 2002, 30（2）: 61-62.
［4］　
李子丰.油气井杆管柱力学及应用［M］. 北京：石油工业出版社，2008.
LI Zifeng. Tubular mechanics in oil-gas wells and its applications［M］. Beijing: Petroleum Industry Press, 2008.
［5］　
LI Zifeng, MA Xingrui, HUANG Wenhu, et al. 3D analysis of bottom hole assemblyunder large deflection［J］. SPE Drilling & Completion, 1996, 11（2）: 104-110.
［6］　
李子丰，李敬元，马兴瑞，等.油气井杆管柱力学基本方程及应用［J］. 石油学报，1999，20（3）：23-26.
LI Zifeng, LI Jingyuan, MA Xingrui, et al. Basic equation of tubular mechanics in oil-gas wells and its applications［J］. Acta Petrolei Sinica, 1999, 20（3）: 23-26.
［7］　
LI Zifeng, LI Jingyuan. Fundamental equations for dynamic analysis of rod and pipe string in oil-gas wells and application in static buckling analysis［J］. Journal of Canadian Petroleum Technology, 2002, 41（5）: 44-53.
［8］　
陈庭根，管志川.钻井工程理论与技术［M］.东营：中国石油大学出版社，2000.
CHEN Tinggen, GUAN Zhichuan. Theory and technology of drilling engineering［M］. Dongying: China University of Petroleum Press, 2000.
［9］　
刘鸿文.材料力学［M］.北京：高等教育出版社， 1992.
LIU Hongwen. Material mechanics［M］. Beijing: China Higher Education Press, 1992.
［10］　
徐芝纶.弹性力学［M］.北京：人民教育出版社，1982.
XU Zhilun. Elastic mechanics［M］. Beijing: People’s Education Press, 1982.
［11］　
李子丰，梁尔国.钻柱力学研究现状及发展［J］.石油钻采工艺，2008，30（2）：1-9.
LI Zifeng, LIANG Erguo. Research and development of drilling string mechanics［J］. Oil Drilling & Production Technology, 2008, 30（2）: 1-9.

相似文献/References:

[1]李国庆夏柏如　姜文勇　李子丰.套管柱拉力—扭矩模型及在定向井中的应用[J].石油钻采工艺,2008,30(2):032.
　LI Guoqing,XIA Bairu,et al.Tension-torque model for casing strings and its application to directional wells cementing[J].Oil Drilling & Production Technology,2008,30(5):032.
[2]赵恩远,夏柏如　赵士强　艾教银.套损井开窗侧钻水平井挖潜剩余油技术[J].石油钻采工艺,2009,31(1):069.
　ZHAO Enyuan,XIA Bairu,et al.Technique of tapping the potential of residual oil in casing damage wells based on side tracking[J].Oil Drilling & Production Technology,2009,31(5):069.
[3]张建兵 　 吕祥鸿 　杨　 勇 　刘　歆.油井管强度计算方法新ISO标准讨论[J].石油钻采工艺,2009,31(2):068.
　ZHANG Jianbing,LV Xianghong,YANG Yong,et al.A Discussion on new ISO criteria for oil well casing strength calculation [J].Oil Drilling & Production Technology,2009,31(5):068.
[4]李子丰　孟宪鹏　梁尔国　王忠福　李天群.水泥浆胶凝失重与套管轴向拉力关系实验研究[J].石油钻采工艺,2010,32(6):023.
　LI Zifeng,MENG Xianpeng,LIANG Erguo,et al.Experimental study on relationship between weight losing of slurry by curing and casing axial tension[J].Oil Drilling & Production Technology,2010,32(5):023.
[5]杨育升　周　冀　朱　萍　夏增德　郭达鹏.稠油井ø177.8 mm套管开窗侧钻技术[J].石油钻采工艺,2011,33(2):029.
　YANG Yusheng,ZHOU Ji,ZHU Ping,et al.Sidetracking technology on ?177.8 mm casing for heavy oil wells[J].Oil Drilling & Production Technology,2011,33(5):029.
[6]许　峰　吕拴录　康延军　杨成新　李怀中　秦宏德.井口套管磨损失效原因分析及预防措施[J].石油钻采工艺,2011,33(2):140.
　XU Feng,LV Shuanlu,et al.Failure analysis and preventing measures for casing worn out at well head[J].Oil Drilling & Production Technology,2011,33(5):140.
[7]孙永兴　易炳刚　林元华　韩烈祥　施太和.考虑制造缺陷的套管抗挤强度计算新模型[J].石油钻采工艺,2012,34(1):036.
　SUN Yongxing,Yi Binggang,LIN Yuanhua,et al.A new calculation model for casing collapse resistance strength considering manufacturing imperfections[J].Oil Drilling & Production Technology,2012,34(5):036.
[8]吴　瑶　毛剑琳　李峰飞　党瑞荣.深水油气勘探救援井精确探测技术研究[J].石油钻采工艺,2014,36(4):026.[doi:10.13639/j.odpt.2014.04.007]
　WU Yao,MAO Jianlin,LI Fengfei,et al.Research on precise detection technology of relief wells for deepwater petroleum exploration[J].Oil Drilling & Production Technology,2014,36(5):026.[doi:10.13639/j.odpt.2014.04.007]
[9]杨保健　付建民　马英文　刘宝生　李晓刚　和鹏飞.?508 mm隔水导管开窗侧钻技术[J].石油钻采工艺,2014,36(4):050.[doi:10.13639/j.odpt.2014.04.013]
　YANG Baojian,FU Jianmin,MA Yingwen,et al.Window sidetracking technology for ?508 mm riser[J].Oil Drilling & Production Technology,2014,36(5):050.[doi:10.13639/j.odpt.2014.04.013]
[10]陈江华 　吴惠梅 　李忠慧 　刘　斌.超深定向井钻井中钻井参数对套管磨损量的影响[J].石油钻采工艺,2014,36(5):010.[doi:10.13639/j.odpt.2014.05.003]
　CHEN Jianghua,WU Huimei,LI Zhonghui,et al.Effect of drilling parameters on casing wear rate in ultra-deep directional well drilling[J].Oil Drilling & Production Technology,2014,36(5):010.[doi:10.13639/j.odpt.2014.05.003]

更新日期/Last Update: 2010-11-09