[1]张定理.油(水)井套管损坏的内衬修复技术[J].石油钻采工艺,1989,11(4):073-78.[doi:10.3969/j.issn.1000-7393.1989.04.012]
点击复制

油(水)井套管损坏的内衬修复技术
分享到:

《石油钻采工艺》[ISSN:1000-7393/CN:13-1072/TE]

卷:
11卷
期数:
1989年4期
页码:
073-78
栏目:
论文
出版日期:
1989-08-20

文章信息/Info

作者:
张定理
玉门石油管理局老君庙油矿井下技术作业科
关键词:
套管损坏内衬管无缝钢管套管油管套管修理
DOI:
10.3969/j.issn.1000-7393.1989.04.012
摘要:
本文介绍的内衬法修复套管破裂或错断,不仅能使套坏停产井恢复生产,而且对防止套坏井死有重大的经济和战略意义衬管一般采用无缝合金钢管、套管或油管。若在生产井目的层以上内衬,衬管长度要以超覆坏套段顶、底8m以上为宜若在膨胀性泥岩部位内衬,衬管长度要尽力全部覆盖并超覆若在油层部位内衬,当衬管内径大于101mm时,衬管长度要全部覆盖射孔段及坏套管段;当衬管内径小于95mm时,一般用贯眼内衬。玉门老君庙油矿从1986~1988年10月底,共施工28口井(其中油井17口,注水井11口),成功率为100%,增注水量达80

相似文献/References:

[1]黄小兰 刘建军 杨春和 何 翔.流固耦合作用下注水井井壁稳定性研究[J].石油钻采工艺,2008,30(6):083.
 HUANG Xiaolan,LIU Jianjun,YANG Chunhe,et al.Borehole stability study of water injection wells in fluid-solid coupling[J].Oil Drilling & Production Technology,2008,30(4):083.
[2]廖华林   管志川  冯光通   阎振来.深井超深井套管损坏机理与强度设计考虑因素[J].石油钻采工艺,2009,31(2):001.
 LIAO Hualin,GUAN Zhichuan,FENG Guangtong,et al.Casing failure mechanism and strength design considerations for deep and ultra-deep wells[J].Oil Drilling & Production Technology,2009,31(4):001.
[3]刘建东 金 娟 沈露禾 卓胜广.赵凹油田地应力分布与套管损坏关系研究[J].石油钻采工艺,2009,31(5):019.
 LIU Jiandong,JIN Juan,et al.The study on the relationship between crustal stress distribution and casing failure in Zhaoao oilfield[J].Oil Drilling & Production Technology,2009,31(4):019.
[4]王仲茂,李文阳.油田注水开发区套管变形机理及预防[J].石油钻采工艺,1989,11(2):011.[doi:10.3969/j.issn.1000-7393.1989.02.003]
[5]张先普,练章华,王钢,等.荆丘油田套管变形机理及防治方法[J].石油钻采工艺,1994,16(2):001.[doi:10.3969/j.issn.1000-7393.1994.02.001]
 Zhang Xianpu,Lian Zhanghua,Wang Gang,et al.DEFORMATION MECHANISM AND PREVENTION OF CASING IN JINGQIU OIL FIELD[J].Oil Drilling & Production Technology,1994,16(4):001.[doi:10.3969/j.issn.1000-7393.1994.02.001]
[6]孟祥玉,滕新兴,孙铭新.胜利油田套管损坏的现状及建议[J].石油钻采工艺,1994,16(2):010.[doi:10.3969/j.issn.1000-7393.1994.02.002]
 Meng Xiangyu,Teng Xinxing,Sun Mingxin.PRESENT SITUATION AND SUGGESTION ABOUT THE CASING FAILURE IN SHENGLI OILFIELD[J].Oil Drilling & Production Technology,1994,16(4):010.[doi:10.3969/j.issn.1000-7393.1994.02.002]
[7]黄毓林,戴祖福.套管腐蚀的预防及治理工艺技术[J].石油钻采工艺,1995,17(2):076.[doi:10.3969/j.issn.1000-7393.1995.02.017]
 Huang Yulin,Dai Zufu.PREVENTION AND CONTROL TECHNOLOGY OF CASING CORROSION[J].Oil Drilling & Production Technology,1995,17(4):076.[doi:10.3969/j.issn.1000-7393.1995.02.017]
[8]张效羽,张先普,赵国珍,等.油水井套管变形损坏的模糊评判[J].石油钻采工艺,1996,18(3):009.[doi:10.3969/j.issn.1000-7393.1996.03.002]
 Zhang Xiaoyu,Zhang Xianpu,Zhao Guozhen,et al.FUZZY DIAGNOSIS ABOUT CASING DEFORMATION IN OIL AND WATER WELL[J].Oil Drilling & Production Technology,1996,18(4):009.[doi:10.3969/j.issn.1000-7393.1996.03.002]
[9]张光普,陈继明,张效羽,等.我国油田套管损坏的原因探讨[J].石油钻采工艺,1996,18(5):007.[doi:10.3969/j.issn.1000-7393.1996.05.002]
 Zhang Xianpu,Chen Jiming,Zhang Xiaoyu,et al.DISCUSSION ON CAUSES OF CASING FAILURE IN OILFIELDS[J].Oil Drilling & Production Technology,1996,18(4):007.[doi:10.3969/j.issn.1000-7393.1996.05.002]
[10]胡博仲,徐志良.大庆油田油水井套管损坏机理及防护措施[J].石油钻采工艺,1998,20(5):095.[doi:10.3969/j.issn.1000-7393.1998.05.019]
 Hu Bozhong,Xu Zhiliang.CASING FAILURE MECHANISMS AND PROTECTION MEASURES OF OIL AND WATER WELLS IN DAQING OILFIELD[J].Oil Drilling & Production Technology,1998,20(4):095.[doi:10.3969/j.issn.1000-7393.1998.05.019]

备注/Memo

备注/Memo:
收稿日期:1989-01-11。
作者简介:张定理,1939年生。1962年毕业于玉门石油学校钻井专业,现任玉门石油管理局老君庙油矿井下技术作业科科长、工程师。
更新日期/Last Update: 1900-01-01