[1]刘国强 王辰龙 曹毅 胡永彪 张康 袁少锋.复杂煤层气井修井原因分析及检杆工艺试验[J].石油钻采工艺,2016,38(4):540-544.[doi:10.13639/j.odpt.2016.04.026]
 LIU Guoqiang,WANG Chenlong,et al.Analysis on the workover reasons for complex CBM well and test on rod checking technology[J].Oil Drilling & Production Technology,2016,38(4):540-544.[doi:10.13639/j.odpt.2016.04.026]
点击复制

复杂煤层气井修井原因分析及检杆工艺试验
分享到:

《石油钻采工艺》[ISSN:1000-7393/CN:13-1072/TE]

卷:
38卷
期数:
2016年4期
页码:
540-544
栏目:
出版日期:
2016-07-20

文章信息/Info

Title:
Analysis on the workover reasons for complex CBM well and test on rod checking technology
文章编号:
1000 – 7393( 2016 ) 04– 0540– 05
作者:
刘国强12 王辰龙3 曹毅4 胡永彪1 张康2 袁少锋2
1. 长安大学工程机械学院; 2. 中石油煤层气有限责任公司临汾分公司; 3. 冀东油田分公司南堡作业区; 4. 中国石油西南油气田分公司勘探开发研究院
Author(s):
LIU Guoqiang1 2 WANG Chenlong3 CAO Yi4 HU Yongbiao1 ZHANG Kang2 YUAN Shaofeng2
1. School of Construction Machinery, Chang’an University, Xi’an, Shaanxi 710064, China; 2. Linfen Branch of PetroChina Coalbed Methane Co. Ltd., Linfen, Shanxi 042000, China; 3. Nanpu Operation District of PetroChina Jidong Oilfield Company, Tangshan, Hebei 063004, China; 4. Exploration and Development Research Institute, PetroChina Southwest Oil & Gas Field Company, Chengdu, Sichuan 610051, China
关键词:
煤层气井修井原因检杆矿场试验应用效果
Keywords:
coalbed methane (CBM) well reasons for workover rod testing field test application result
分类号:
TE358.4
DOI:
10.13639/j.odpt.2016.04.026
文献标志码:
B
摘要:
井筒复杂、深度超过1 100 m 的煤层气定向井在生产过程中修井频繁,而常规检泵修井工艺难以满足实际生产需要。针对这一问题,对C 区块50 口煤层气井的修井原因进行了对比分析,结果表明油管漏失、泵故障、抽油杆断脱是导致频繁修井的主要原因,而机械磨损和腐蚀严重是修井的主要影响因素。在此基础上针对性地提出了检杆修井这种新的作业方式,即通过修井井史分析,预测井下设备运行状态,在躺井前不动油管柱,只提出抽油杆柱进行优化。检杆作业由井下设备服役状态预测、配套工艺、施工运行构成一套工艺措施,具有工艺简单、施工时间短、投入产出比高的特点。现场应用效果表明检杆工艺是一种适合复杂煤层气井的经济有效的修井技术。
Abstract:
Workover is carried out frequently when complex coalbed methane (CBM) directional wells of over 1 100 m deep are in operation. However, the conventional workover technologies by pump inspection can not deal with this purpose effectively. Under this background, the reasons for the workover of 50 CBM wells in Block C were analyzed and compared. It is shown that tubing leakage,pump failure and sucker rod dropout are the main reasons for frequent workover, and mechanical wear and serious corrosion are the dominant influential factors of workover. Then, a new operation mode which is about rod testing workover, was proposed. The rod testing operation is a suite of technical measures, including downhole equipment service state prediction, supporting techniques and construction and operation. It is characterized by simple process, short construction period and high input/output ratio. Field applications have demonstrated that the rod testing is an economical and effective workover technology suitable for complex CBM wells.

相似文献/References:

[1]张公社 李永康 尹俊禄 唐文英 崔金榜 程 浩.沁水盆地煤层气井坍塌压力预测[J].石油钻采工艺,2010,32(4):096.
 ZHANG Gongshe,LI Yongkang,YIN Junlu,et al.Prediction of collapse pressure for CBM wells in Qinshui CBM fields[J].Oil Drilling & Production Technology,2010,32(4):096.
[2]石惠宁 马成宇 梅永贵 刘栓桩 王胜利 周 帅.樊庄高煤阶煤层气井智能排采技术研究及应用[J].石油钻采工艺,2010,32(4):107.
 SHI Huining,MA Chengyu,MEI Yonggui,et al.Research and application of intelligent recovery technology for Fanzhuang high rank CBM wells[J].Oil Drilling & Production Technology,2010,32(4):107.
[3]孙晗森 罗陶涛 刘春琴 杨国胜 郝明圈 杨安旗.煤层气井用黏弹性表面活性剂压裂液性能评价[J].石油钻采工艺,2010,32(4):112.
 SUN Hansen,LUO Taotao,LIU Chunqin,et al.Performance evaluation of viscoelastic surfactant as fracturing fluid for CBM wells[J].Oil Drilling & Production Technology,2010,32(4):112.
[4]王国荣 雷中清 成 兵 魏晓东 李大彬 刘 洋.煤层气欠平衡钻井专用旋转控制头在郑试平4H井的应用[J].石油钻采工艺,2011,33(3):087.
 WANG Guorong,LEI Zhongqing,CHENG Bing,et al.Field test of special rotary control head in CBM well under-balanced drilling in Well ZHP4[J].Oil Drilling & Production Technology,2011,33(4):087.
[5]孙仁远 宣英龙 任晓霞 王楚峰 胡爱梅.煤层气井井底流压计算方法[J].石油钻采工艺,2012,34(4):100.
 SUN Renyuan,XUAN Yinglong,et al.Methods of bottom-hole flow pressure calculations for coalbed methane wells [J].Oil Drilling & Production Technology,2012,34(4):100.
[6]龚志敏,段乃中.岚M1-1煤层气多分支水平井充气钻井技术[J].石油钻采工艺,2006,28(1):015.[doi:10.3969/j.issn.1000-7393.2006.01.005]
 Gong Zhimin,Duan Naizhong.TECHNOLOGY OF DRILLING MIXED WITH GAS FOR LAN M1-1 COALBED GAS MULTI-BRANCH HORIZONTAL WELL[J].Oil Drilling & Production Technology,2006,28(4):015.[doi:10.3969/j.issn.1000-7393.2006.01.005]
[7]王凤清 韩军 王辰龙 张康 徐贵东 刘国强.一种煤岩储层保护装置的研制与应用[J].石油钻采工艺,2016,38(3):405.[doi:10.13639/j.odpt.2016.03.025]
 WANG Fengqing,HAN Jun,WANG Chenlong,et al.Development and application of a coal reservoir protection device[J].Oil Drilling & Production Technology,2016,38(4):405.[doi:10.13639/j.odpt.2016.03.025]
[8]杨万有 郑春峰.煤层气井产出液煤粉含量监测[J].石油钻采工艺,2016,38(6):882.[doi:10.13639/j.odpt.2016.06.032]
 YANG Wanyou,ZHENG Chunfeng.Monitoring of produced fluid of coal content in coalbed methane wells[J].Oil Drilling & Production Technology,2016,38(4):882.[doi:10.13639/j.odpt.2016.06.032]
[9]孙志和  朱克华  刘超  宁军  孙天宇  邵帅  付君豪.绳索取心技术在煤层气DP1 井的应用[J].石油钻采工艺,2018,40(6):716.[doi:10.13639/j.odpt.2018.06.008]
 SUN Zhihe,ZHU Kehua,LIU Chao,et al.Application of wireline coring technology in coalbed methane well DP1[J].Oil Drilling & Production Technology,2018,40(4):716.[doi:10.13639/j.odpt.2018.06.008]

更新日期/Last Update: 2016-09-06