[1]薛建泉  黄宇轩  王通  赵建  虞欣睿.海上射流泵井井筒温度场模型[J].石油钻采工艺,2018,40(6):782-786.[doi:10.13639/j.odpt.2018.06.017]
 XUE Jianquan,HUANG Yuxuan,WANG Tong,et al.A borehole temperature field model for offshore wells equipped with jet pump[J].Oil Drilling & Production Technology,2018,40(6):782-786.[doi:10.13639/j.odpt.2018.06.017]
点击复制

海上射流泵井井筒温度场模型
分享到:

《石油钻采工艺》[ISSN:1000-7393/CN:13-1072/TE]

卷:
40卷
期数:
2018年6期
页码:
782-786
栏目:
油气开采
出版日期:
2018-11-20

文章信息/Info

Title:
A borehole temperature field model for offshore wells equipped with jet pump
文章编号:
1000 – 7393( 2018 )06 – 0782 – 05
作者:
薛建泉1  黄宇轩1  王通2  赵建1  虞欣睿1
1. 中国石油大学(华东)石油工程学院;2. 中海油田服务股份有限公司油田生产事业部
Author(s):
XUE Jianquan1 HUANG Yuxuan1 WANG Tong2 ZHAO Jian1 YU Xinrui1
1. College of Petroleum Engineering, China University of Petroleum (East China), Qingdao 266000, Shandong, China; 2. Oilfield Production Department, China Oilfield Services Limited, Tianjin 300459, China
关键词:
海上油田稠油开发射流泵井井筒传热温度场模型多元热流体
Keywords:
offshore oil field development of heavy oil well equipped with jet pump wellbore heat transfer temperature field model multi-component thermal fluid
分类号:
TE53
DOI:
10.13639/j.odpt.2018.06.017
文献标志码:
A
摘要:
稠油的开采方式主要是降低原油黏度,增加其流动性。由于原油的黏度对于温度极其敏感,热采开采方式备受关注。以渤海油田A 区的实验井为例,介绍了射流泵井以多元热流体为动力液在同心管井筒的传热特点,研究了热流体在井筒各部分的传热过程,建立了综合传热系数的计算方法以及井筒温度场模型,根据相应的温度场求解流程,编制软件,并以实际射流泵生产井为例进行计算。实际测量结果与软件计算结果存在8.87% 的误差,可以为后续海上稠油油田射流泵井工况诊断和参数优化提供保障。
Abstract:
The exploitation mode of heavy oil is mainly to decrease the viscosity of crude oil and increase its fluidity. The viscosity of crude oil is extremely sensitive to temperature, so the thermal recovery modes are much concerned. In this paper, the experimental well in Block A of Bohai Oilfield was taken as an example. The characteristics of heat transfer in the concentric borehole of the well equipped with jet pump by taking the multi-component thermal fluid as the power fluid were introduced. Then, the heat transfer process of thermal fluid in each part of the borehole was investigated, and the method for calculating the combined heat transfer coefficient was developed. In addition, the borehole temperature field model was established, and the software was programmed according to the corresponding temperature field solution process. Finally, the calculation was carried out with one actual production well equipped with jet pump as the example. It is shown that the error between the actual measurement value and the calculation result is 8.87%. It is proved that the research results can provide the guarantee for the working condition diagnosis and parameter optimization of wells equipped with jet pump in offshore heavy oil fields.

相似文献/References:

[1]康晓东 张 健 张贤松 冯国智 杨 光.海上油田注聚过程中的井间窜流与防窜对策[J].石油钻采工艺,2009,31(5):097.
 KANG Xiaodong,ZHANG Jian,ZHANG Xiansong,et al.Inter-well flow during polymer injection for offshore oilfields and preventing methods[J].Oil Drilling & Production Technology,2009,31(6):097.
[2]张吉江 张 鑫 蔡光杰 董 蕾.油管完井在QHD32-6-A平台的成功应用[J].石油钻采工艺,2010,32(5):032.
 ZHANG Jijiang,ZHANG Xin,CAI Guangjie,et al.Tube completion successful application in QHD32-6-A platform[J].Oil Drilling & Production Technology,2010,32(6):032.
[3]李文勇 韦红术 陈 斌 张 力 逄淑华.流花11-1油田大位移井尾管作业技术[J].石油钻采工艺,2010,32(6):115.
 LI Wenyong,WEI Hongshu,CHEN Bin,et al.Liner running techniques for extended reach wells in Liuhua 11-1 field[J].Oil Drilling & Production Technology,2010,32(6):115.
[4]谭章龙 司念亭 李贵川 龙江桥 陈永锋 罗少锋.双管生产管柱改单管配套修井技术应用与实践[J].石油钻采工艺,2010,32(6):132.
 TAN Zhanglong,SI Nianting,LI Guichuan,et al.Application and practice of well-repair matching technology for changing the dual-strings into single-strings[J].Oil Drilling & Production Technology,2010,32(6):132.
[5]王成胜 黄 波 易 飞 陈士佳 朱洪庆 孙艳萍.渤海SZ36-1油田缔合聚合物黏度损失研究[J].石油钻采工艺,2010,32(5):082.
 WANG Chengsheng,HUANG Bo,YI Fei,et al.Research on viscosity loss of association polymer in Bohai SZ36-1 Oilfield[J].Oil Drilling & Production Technology,2010,32(6):082.
[6]纵封臣 齐 桃 李伟超 李玉光 管虹翔.海上稠油井筒降黏及配套举升工艺[J].石油钻采工艺,2011,33(3):047.
 ZONG Fengchen,QI Tao,LI Weichao,et al.Viscosity reducing and integrated artificial lifttechniques for heavy oil wellbore in offshore oilfield[J].Oil Drilling & Production Technology,2011,33(6):047.
[7]黄新春 郑春峰 李 昂 苏作飞.QHD32-6油田电泵机组故障预测方法及其现场应用[J].石油钻采工艺,2014,36(1):116.
 HUANG Xinchun,ZHENG Chunfeng,LI Ang,et al.Fault prediction method and field application of QHD32-6 oilfield electric pump unit[J].Oil Drilling & Production Technology,2014,36(6):116.
[8]李 敢.埕岛海上油田分层注水井电动通井打捞技术改进及应用[J].石油钻采工艺,2015,37(2):079.[doi:10.13639/j.odpt.2015.02.021]
 LI Gan.Improvement and application of electric drifting and fishing technique in separate layer water injection wells of Chengdao Offshore Oilfield[J].Oil Drilling & Production Technology,2015,37(6):079.[doi:10.13639/j.odpt.2015.02.021]
[9]邹 阿 七.海上薄油层多分支水平井钻井技术[J].石油钻采工艺,2014,36(3):015.[doi:10.13639/j.odpt.2014.03.004]
 Zou Aqi.Drilling technology for multi-lateral horizontal wells for thin reservoir in offshore oilfield[J].Oil Drilling & Production Technology,2014,36(6):015.[doi:10.13639/j.odpt.2014.03.004]
[10]王 珊  曹砚锋  姜文卷  周定照  靳 勇  刘 尧.渤海某油田绒囊暂堵流体修井工艺[J].石油钻采工艺,2015,37(3):114.[doi:10.13639/j.odpt.2015.03.026]
 WANG Shan,CAO Yanfeng,JIANG Wenjuan,et al.Workover technology using fuzzy-ball temporary plugging fluid in Bohai Oilfield[J].Oil Drilling & Production Technology,2015,37(6):114.[doi:10.13639/j.odpt.2015.03.026]

更新日期/Last Update: 2019-04-10