[1]严谨  程时清   郑荣臣  王树平  史文洋  张郁哲  李鼎一.确定压裂裂缝部分闭合的现代产量递减分析方法及应用[J].石油钻采工艺,2018,40(6):787-793.[doi:10.13639/j.odpt.2018.06.018]
 YAN Jin,CHENG Shiqing,ZHENG Rongchen,et al.Development and application of the modern production decline analysis method in consideration of partial closure of hydraulic fracture[J].Oil Drilling & Production Technology,2018,40(6):787-793.[doi:10.13639/j.odpt.2018.06.018]
点击复制

确定压裂裂缝部分闭合的现代产量递减分析方法及应用
分享到:

《石油钻采工艺》[ISSN:1000-7393/CN:13-1072/TE]

卷:
40卷
期数:
2018年6期
页码:
787-793
栏目:
油气开采
出版日期:
2018-11-20

文章信息/Info

Title:
Development and application of the modern production decline analysis method in consideration of partial closure of hydraulic fracture
文章编号:
1000 – 7393( 2018 )06 – 0787– 07
作者:
严谨1  程时清23   郑荣臣1  王树平1  史文洋23  张郁哲23  李鼎一23
1. 中国石化石油勘探开发研究院;2. 中国石油大学(北京)油气资源与探测国家重点实验室;3. 中国石油大学(北京)
Author(s):
YAN Jin1 CHENG Shiqing2 3 ZHENG Rongchen1 WANG Shuping1 SHI Wenyang2 3 ZHANG Yuzhe2 3 LI Dingyi2 3
1. SINOPEC Key Laboratory of Marine Oil and Gas Reservoir Development, Beijing 100083, China; 2. State Key Laboratory of Petroleum Resources and Prospecting, China University of Petroleum (Beijing), Beijing 102249, China; 3. China University of Petroleum (Beijing), Beijing 102249, China
关键词:
致密气藏压裂井裂缝部分闭合裂缝流量不均现代产量递减
Keywords:
tight gas reservoir fractured well partial fracture closure nonuniform flow rate in fracture modern production decline
分类号:
TE328
DOI:
10.13639/j.odpt.2018.06.018
文献标志码:
A
摘要:
现有的压裂井产量递减分析商业软件中没有考虑压裂缝闭合对油气产量的影响,所解释的压裂井裂缝长度远小于实际压裂缝长度。基于压裂井裂缝部分闭合和裂缝流量不均匀特征,建立了考虑裂缝部分闭合的压裂井产量递减模型,通过Newman 乘积、空间变换与数值反演得到压裂井不稳定产量解,绘制了产量递减理论图版。与常规压裂井产量递减模型对比发现:新模型由于考虑了闭合裂缝的影响,不稳定流阶段产量递减速率比常规递减模型降低30%~50%;进入边界控制流阶段后,两种模型的曲线大致重合;当裂缝部分闭合长度增大时,递减速率降低的幅度也将变大。新模型在苏里格、大牛地等致密气藏的压裂井产量递减分析中拟合效果较常规递减模型好,解释得到的远井段闭合裂缝长度可以用来预测裂缝部分闭合对压裂井产量的影响。
Abstract:
Existing commercial soft ware used for analyzing the production decline of fractured wells doesn’t take into consideration the effect of hydraulic fracture closure on oil and gas production rate, so the interpreted fracture length of fractured well is much shorter than the actual length of hydraulic fracture. The production decline model in consideration of partial fracture closure for fractured well was established based on the characteristics of fractured wells, i.e., the partial fracture closure and the nonuniform flow rate in fractures. Then, the unstable production rate of fractured well was solved by means of Newman product, spatial exchange and numerical inversion. Finally, the theoretical chart of production decline was plotted. It is revealed by comparing the production decline model in consideration of partial fracture closure for fractured well with the conventional production decline model for fractured well that the new model is 30%-50% lower than the conventional production decline model in the rate of production decline in the period of unstable flow for it takes the effect of closed fractures into consideration. The curves of both models are approximately coincident in the period of boundary dominated flow. As the partial closure length of fractures increase, the decreasing amplitude of decline rate will increase. The new model is applied to analyze the production decline of fractured wells in tight gas reservoirs, e.g., Sulige and Daniudi. Its fitting results are better than those of conventional decline model, and its interpreted length of closed fractures far from the well can be used to predict the effect of partial fracture closure on the production rate of fractured well.

相似文献/References:

[1]许明静 程时清 杨天龙 周安全.油水两相流不稳定试井压力分析[J].石油钻采工艺,2009,31(4):071.
 XU Mingjing,CHENG Shiqing,YANG Tianlong,et al.The transient pressure analysis of well test with water-oil two-phase fluid flow[J].Oil Drilling & Production Technology,2009,31(6):071.
[2]丛连铸 李治平 刘学伟 陈何彬.致密气藏低伤害压裂液研究及应用[J].石油钻采工艺,2008,30(2):078.
 CONG Lianzhu,LI Zhiping,LIU Xuewei,et al.Research on low damage fracturing fluid in tight gas reservoirs and its application[J].Oil Drilling & Production Technology,2008,30(6):078.
[3]邓金根 郭先敏 孙 焱 戚 斌 雷 炜.致密气藏压裂井定向射孔优化技术[J].石油钻采工艺,2008,30(6):093.
 DENG Jingen,GUO Xianmin,SUN Yan,et al.Research on oriented perforation optimization technique for fracturing wells in tight gas reservoir[J].Oil Drilling & Production Technology,2008,30(6):093.
[4]蒋廷学 李治平 才 博 王 欣 舒玉华.松辽盆地南部致密气藏低伤害大型压裂改造技术研究与试验[J].石油钻采工艺,2009,31(4):006.
 JIANG Tingxue,LI Zhiping,et al.Study and field test of low damage & massive hydraulic fracturing techniques in tight gas reservoirs in the south of Songliao Basin[J].Oil Drilling & Production Technology,2009,31(6):006.
[5]辛俊和  吴广义  张华北.加拿大致密气藏长水平段工厂化钻完井技术[J].石油钻采工艺,2014,36(2):007.[doi:10.13639/j.odpt.2014.02.002]
 XIN Junhe,WU Guangyi,ZHANG Huabei.Factory-like drilling and completion techniques for long horizontal wells in tight gas reservoirs of Canada[J].Oil Drilling & Production Technology,2014,36(6):007.[doi:10.13639/j.odpt.2014.02.002]
[6]欧阳勇  周文军  徐自强  黄占盈.频率可调式脉冲钻井提速工具的研制和应用[J].石油钻采工艺,2013,35(2):006.
 OU Yangyong,ZHOU Wenjun,XU Ziqiang,et al.Research and application of frequency adjustable pulse jet generating tool to improve ROP[J].Oil Drilling & Production Technology,2013,35(6):006.
[7]刘建伟,王宇宾,王树军,等.红台204井致密气藏大型压裂技术应用实践[J].石油钻采工艺,2004,26(2):062.[doi:10.3969/j.issn.1000-7393.2004.02.018]
 Liu Jianwei,Wang Yubin,Wang Shujun,et al.APPLICATION OF LARGE SCALE FRACTURING TECHNOLOGY TO RESERVOIR STIMULATION IN NO.204 GAS WELL OF HONGTAI COMPACT GAS FIELD[J].Oil Drilling & Production Technology,2004,26(6):062.[doi:10.3969/j.issn.1000-7393.2004.02.018]
[8]张汝生  李克智  黄志文.定北区块致密气储层水平井压裂参数优化[J].石油钻采工艺,2017,39(2):249.[doi:10.13639/j.odpt.2017.02.022]
 ZHANG Rusheng,LI Kezhi,et al.Horizontal well fracturing parameter optimization for the tight gas reservoir in Dingbei Block[J].Oil Drilling & Production Technology,2017,39(6):249.[doi:10.13639/j.odpt.2017.02.022]
[9]罗炫  杨通水  杨曦.致密凝析有水气藏断层特征及其对开发效果的影响 ——以安岳气田须二气藏为例[J].石油钻采工艺,2018,40(4):477.[doi:10.13639/j.odpt.2018.04.013]
 LUO Xuan,YANG Tongshui,YANG Xi.Fault characteristics of water-bearing tight condensate gas reservoirs and their effects on development effectiveness: A case study on the Xu 2 gas reservoir in Anyue Gasfield[J].Oil Drilling & Production Technology,2018,40(6):477.[doi:10.13639/j.odpt.2018.04.013]

更新日期/Last Update: 2019-04-10